MPPT 太阳能混合离网逆变器

Technical Features:
1.Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
2.Intelligentized, modularized, simple structure design with powerful function.
3.Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
4.The output frequency can be setting via LCD panel, it’s very convenient for customer.
5.The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6.The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7.Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
8.Low Frequency Transformer, which ensures that inverter has high efficiency.
9.High conversion efficiency, Max. Efficiency≥94%，if 48VDC input,the efficiency can more than 85%.
10.Adopts black pure aluminum radiator, which confirms the best radiating performance.
11.Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
12.Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
13.Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
14.Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.
Technical Parameters (Normal model)
Model	                	                BZP-6KW
Isolation mode	Low Frequency Transformer
DC Input	
Rated voltage (Vdc)	          96V                     	    120V
Rated current（A）         62.5A	                      50A
AC Output	
Rated output power                           6KW
Output waveform	                                    Pure Sine Wave
Rated Voltage	                              220V±3%	                 380VAC±3%	
Phases		                           Single phase	                 3 phase 4 wire
Rated current（A）		                  27A	                 9A (phase current)
Frequency	                                          50Hz or 60Hz
Rated output voltage range (V)	110/120/220/230/240/380/400/415VAC optional
Power Factor（PF）	                                   1
Overload Ability	                                 150%, 5 seconds
Efficiency	                                                        >93%
Waveform distortion rate (THD)	           <3%（Linear load）
Dynamic Response (0 to ** load)	     5%，≤50ms
Display	                                                          LCD
Running mode	                                 Working continuously
Electrical insulation properties	    2000Vac, 1 Minute
Communication interface (optional)	        RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Cooling method	                             Fan-cooled
Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	
Noise ( 1 meter)	                          ≤50dB
Degree of protection	       IP20（indoor）
Working Altitude（m）	        ≤2000
Working temperature 	    -25~+50℃
relative humidity	                   0~90%，non-condensing
Mechanical dimension	
Depth* Width * Height	540x540x760mm
Weight （Kg）		     110Kg